各位大神們 想跟大家詢問
小弟我有寫好一組matlab 代碼 是為了zemax 跑公差用的 想問一下 如果想將這組matlab代碼轉成python代碼 可以怎麼做呢 尋求大神們幫忙
以下是小弟的matlab代碼 再麻煩大神們幫忙
感激不盡
~~~
function [ r ] = MATLABStandaloneApplication( args )
if ~exist('args', 'var')
args = [];
end
% Initialize the OpticStudio connection
TheApplication = InitConnection();
if isempty(TheApplication)
% failed to initialize a connection
r = [];
else
try
r = BeginApplication(TheApplication, args);
CleanupConnection(TheApplication);
catch err
CleanupConnection(TheApplication);
rethrow(err);
end
end
end
function [r] = BeginApplication(TheApplication, args)
import ZOSAPI.*;
TheSystem = TheApplication.PrimarySystem;
%Figure Setting
xA = "Two Mirror Gap Change (um)";
yA = "Contrast";
yA1 = "Contrast Deformation";
Leg1 = ['X - Contrast'; 'Y - Contrast'];
Ptitle = 'Contrast in X/Y vs. 2 Mirror Gap';
Ptitle1 = 'Contrast Deformation vs. 2 Mirror Gap';
sqn = 20;
% Set up primary optical system
% TheSystem = TheApplication.PrimarySystem;
sampleDir = TheApplication.SamplesDir;
% Open file
testFile = System.String.Concat(sampleDir, '\z_5a.zma');
if (exist(char(testFile)) == 0)
fprintf('You need to run Z_5a.zmx before running this example\n');
r = [];
return;
end
TheSystem.LoadFile(testFile,false);
TheLDE = TheSystem.LDE;
Surface_0 = TheLDE.GetSurfaceAt(0);
Surface_1 = TheLDE.GetSurfaceAt(1);
Surface_2 = TheLDE.GetSurfaceAt(2);
Surface_5 = TheLDE.GetSurfaceAt(5);
% Set the calculation cycle number
CN = 41; Ar_nb = CN-1;
% set max gap variation, unit = micron
Dmzx = -20; % Gap
Dmzx_Step = -2*Dmzx/(CN-1);
DmN = (1:CN);
DmXX = Dmzx + (DmN - 1)*Dmzx_Step;
Conx = zeros(1, Ar_nb);
Cony = Conx;
for jj = 1:CN
Surface_2.Thickness = (Dmzx + (jj-1)*Dmzx_Step)/1000; %Wafer gap change
TheSystem.Save();
pop = TheSystem.Analyses.Get_AnalysisAtIndex(4);
pop_setting = pop.GetSettings();
cfg = System.String.Concat(sampleDir,'\so_lens.cfg');
pop_setting.SaveTo(cfg);
pop_setting.LoadFrom(cfg);
pop_setting.ModifySettings(cfg, 'EXD_FILESIZE', 0.832) %square array size.
pop_setting.ModifySettings(cfg, 'EXD_DISPLAYSIZE', 0.832) %square array size.
pop.ApplyAndWaitForCompletion();
results = pop.GetResults();
header = results.HeaderData;
AAA = results.DataGrids(1).Values.double;
[ax, ay] = size(AAA);
arxn = round(ax/10);
aryn = round(ay/10);
BBB = AAA(arxn:ax-arxn, aryn:ay-aryn);
Iy0 = max(BBB, [], 1); Ix0 = max(BBB, [], 2);
Iy = sort(Iy0, 'descend'); Ix = sort(Ix0, 'descend');
Iymx = mean(Iy(1:sqn)); Iymn = mean(Iy(end-sqn:end));
Ixmx = mean(Ix(1:sqn)); Ixmn = mean(Ix(end-sqn:end));
Conx(jj) = (Ixmx - Ixmn)/(Ixmx + Ixmn);
Cony(jj) = (Iymx - Iymn)/(Iymx + Iymn);
end
ConDiff = 2*abs(Cony-Conx)./(Conx+Cony);
figure(1)
plot(DmXX, Conx, 'b', DmXX, Cony, 'r');
legend(Leg1);
xlabel(xA);
ylabel(yA);
title(Ptitle)
fontsize(gcf,scale=1.2);
figure(2)
plot(DmXX, ConDiff);
% legend(Leg1);
xlabel(xA);
ylabel(yA1);
title(Ptitle1);
fontsize(gcf,scale=1.2);
Surface_0.Thickness = 186.13848;
Surface_2.Thickness = 0;
TheSystem.Save();
r = [];
end
function app = InitConnection()
import System.Reflection.*;
% Find the installed version of OpticStudio.
zemaxData = winqueryreg('HKEY_CURRENT_USER', 'Software\Zemax', 'ZemaxRoot');
NetHelper = strcat(zemaxData, '\ZOS-API\Libraries\ZOSAPI_NetHelper.dll');
% Note -- uncomment the following line to use a custom NetHelper path
% NetHelper = 'C:\Users\swang250\OneDrive - JNJ\Documents\Zemax\ZOS-API\Libraries\ZOSAPI_NetHelper.dll';
% This is the path to OpticStudio
NET.addAssembly(NetHelper);
success = ZOSAPI_NetHelper.ZOSAPI_Initializer.Initialize();
% Note -- uncomment the following line to use a custom initialization path
% success = ZOSAPI_NetHelper.ZOSAPI_Initializer.Initialize('C:\Program Files\OpticStudio\');
if success == 1
LogMessage(strcat('Found OpticStudio at: ', char(ZOSAPI_NetHelper.ZOSAPI_Initializer.GetZemaxDirectory())));
else
app = [];
return;
end
% Now load the ZOS-API assemblies
NET.addAssembly(AssemblyName('ZOSAPI_Interfaces'));
NET.addAssembly(AssemblyName('ZOSAPI'));
% Create the initial connection class
TheConnection = ZOSAPI.ZOSAPI_Connection();
% Attempt to create a Standalone connection
% NOTE - if this fails with a message like 'Unable to load one or more of
% the requested types', it is usually caused by try to connect to a 32-bit
% version of OpticStudio from a 64-bit version of MATLAB (or vice-versa).
% This is an issue with how MATLAB interfaces with .NET, and the only
% current workaround is to use 32- or 64-bit versions of both applications.
app = TheConnection.CreateNewApplication();
if isempty(app)
HandleError('An unknown connection error occurred!');
end
if ~app.IsValidLicenseForAPI
HandleError('License check failed!');
app = [];
end
end
function LogMessage(msg)
disp(msg);
end
function HandleError(error)
ME = MException('zosapi:HandleError', error);
throw(ME);
end
function CleanupConnection(TheApplication)
% Note - this will close down the connection.
% If you want to keep the application open, you should skip this step
% and store the instance somewhere instead.
TheApplication.CloseApplication();
end
~~~
本帖最后由 不如吃茶 于 2023-6-14 09:42 编辑
ChatGPT写的，你试试
又添加了注释
import os
import clr
from System import String
from matplotlib import pyplot as plt
def MATLABStandaloneApplication(args=None):
if args is None:
args = []
# Initialize the OpticStudio connection
TheApplication = InitConnection()
if TheApplication is None:
# failed to initialize a connection
return None
else:
try:
r = BeginApplication(TheApplication, args)
CleanupConnection(TheApplication)
return r
except Exception as err:
CleanupConnection(TheApplication)
raise err
def BeginApplication(TheApplication, args):
ZOSAPI = clr.Import('ZOSAPI')
TheSystem = TheApplication.PrimarySystem
# Figure Setting
xA = "Two Mirror Gap Change (um)"
yA = "Contrast"
yA1 = "Contrast Deformation"
Leg1 = ['X - Contrast', 'Y - Contrast']
Ptitle = 'Contrast in X/Y vs. 2 Mirror Gap'
Ptitle1 = 'Contrast Deformation vs. 2 Mirror Gap'
sqn = 20
# Set up primary optical system
sampleDir = TheApplication.SamplesDir
# Open file
testFile = os.path.join(sampleDir, 'z_5a.zma')
if not os.path.exists(testFile):
print('You need to run Z_5a.zmx before running this example')
return None
TheSystem.LoadFile(testFile, False)
TheLDE = TheSystem.LDE
Surface_0 = TheLDE.GetSurfaceAt(0)
Surface_1 = TheLDE.GetSurfaceAt(1)
Surface_2 = TheLDE.GetSurfaceAt(2)
Surface_5 = TheLDE.GetSurfaceAt(5)
# Set the calculation cycle number
CN = 41
Ar_nb = CN - 1
# set max gap variation, unit = micron
Dmzx = -20 # Gap
Dmzx_Step = -2 * Dmzx / (CN - 1)
DmN = range(1, CN + 1)
DmXX = [Dmzx + (n - 1) * Dmzx_Step for n in DmN]
Conx = [0] * Ar_nb
Cony = [0] * Ar_nb
for jj in DmN:
Surface_2.Thickness = (Dmzx + (jj - 1) * Dmzx_Step) / 1000 # Wafer gap change
TheSystem.Save()
pop = TheSystem.Analyses.Get_AnalysisAtIndex(4)
pop_setting = pop.GetSettings()
cfg = os.path.join(sampleDir, 'so_lens.cfg')
pop_setting.SaveTo(cfg)
pop_setting.LoadFrom(cfg)
pop_setting.ModifySettings(cfg, 'EXD_FILESIZE', 0.832) # square array size.
pop_setting.ModifySettings(cfg, 'EXD_DISPLAYSIZE', 0.832) # square array size.
pop.ApplyAndWaitForCompletion()
results = pop.GetResults()
header = results.HeaderData
AAA = results.DataGrids(1).Values.double
ax, ay = AAA.GetLength(0), AAA.GetLength(1)
arxn = round(ax / 10)
aryn = round(ay / 10)
BBB = [[AAA[i, j] for j in range(aryn, ay - aryn)] for i in range(arxn, ax - arxn)]
Iy0 = [max(row) for row in BBB]
Ix0 = [max(col) for col in zip(*BBB)]
Iy = sorted(Iy0, reverse=True)
Ix = sorted(Ix0, reverse=True)
Iymx = sum(Iy[:sqn]) / sqn
Iymn = sum(Iy[-sqn:]) / sqn
Ixmx = sum(Ix[:sqn]) / sqn
Ixmn = sum(Ix[-sqn:]) / sqn
Conx[jj - 1] = (Ixmx - Ixmn) / (Ixmx + Ixmn)
Cony[jj - 1] = (Iymx - Iymn) / (Iymx + Iymn)
ConDiff = [2 * abs(Cony - Conx) / (Conx + Cony) for i in range(Ar_nb)]
plt.figure(1)
plt.plot(DmXX, Conx, 'b', DmXX, Cony, 'r')
plt.legend(Leg1)
plt.xlabel(xA)
plt.ylabel(yA)
plt.title(Ptitle)
plt.figure(2)
plt.plot(DmXX, ConDiff)
plt.xlabel(xA)
plt.ylabel(yA1)
plt.title(Ptitle1)
Surface_0.Thickness = 186.13848
Surface_2.Thickness = 0
TheSystem.Save()
return []
def InitConnection():
NetHelper = r'C:\Program Files\Zemax OpticStudio\ZOS-API\Libraries\ZOSAPI_NetHelper.dll'
try:
clr.AddReference(NetHelper)
except Exception as e:
print(f"Failed to add reference to {NetHelper}")
return None
import ZOSAPI
success = ZOSAPI.ZOSAPI_Initializer.Initialize()
if success == 1:
LogMessage(f"Found OpticStudio at: {ZOSAPI.ZOSAPI_Initializer.GetZemaxDirectory()}")
else:
return None
clr.AddReference("ZOSAPI_Interfaces")
clr.AddReference("ZOSAPI")
TheConnection = ZOSAPI.ZOSAPI_Connection()
app = TheConnection.CreateNewApplication()
if app is None:
HandleError("An unknown connection error occurred!")
if not app.IsValidLicenseForAPI:
HandleError("License check failed!")
return None
return app
def LogMessage(msg):
print(msg)
def HandleError(error):
raise Exception(error)
def CleanupConnection(TheApplication):
TheApplication.CloseApplication()
# 调用示例
MATLABStandaloneApplication()
发表于 2023-6-13 14:50
